Building a Segbot (with a Soldered Board)
If you have not yet soldered a board together, you must do that first. Soldering a Segbot Board.
Overview
This page explains how to construct a Segbot once you have completely soldered the main board for the robot. On the right side of each page there is a dropdown box with links to each of the steps should you chose to jump around in the order. The steps for building a Segbot are listed below.
Getting Started
Before you begin assembling the Segbot, make sure you view the
Bill of Materials and check to make sure that you have all of the parts and tools required to build the Segbot.
Once you have checked to make sure you have everything you will need, get started on the first step by
installing encoders on the DC motors.
Home ♦ Updates ♦ Videos ♦ Contact Information